© Tim Scrivener Establishment is widely recognised as the main challenge when it comes to growing a successful crop of oilseed rape, get it wrong and yield potential is compromised from the

start. With its small seed size, oilseed rape is particularly susceptible at the seedling stage, when poor seed-bed conditions, unpredictable weather and pest pressures can turn a risky

situation into crop failure. Crops which establish quickly and get off to a good start in mild autumn conditions are better able to withstand these pressures and are far more likely to reach

their full yield potential. See also: Oilseed rape growers urged to take action against clubroot YIELD POTENTIAL That yield potential is anything up to 9t/ha, suggests the team behind the

size at flowering so it will go on to produce the optimum pod number. Establishment, along with seed rate and nutrition, are the key factors in achieving this. To get good crop

establishment, growers must look at soil conditions before they focus on any agronomic considerations, as the crop is more likely to establish successfully in a well-structured soil. Soil

conditions should also dictate the time of drilling, rather than calendar date. This is illustrated by the range of sowing dates used by the YEN entrants, from 6 August to 15 September, with

the average sowing date being 23 August. Analysis by Bayer shows the UK oilseed rape crop is drilled about two weeks earlier than  five years ago. Sowing dates in the third week of August

are now the most popular. SEED-BED CONDITIONS As with most crops, the aim is to create a seed-bed with a fine tilth. A useful rule of thumb is the smaller the seed, the smaller the aggregate

needed around it – there is research to show percentage establishment falls dramatically as aggregate size increases. Good seed-to-soil contact is important for best results, as it allows

moisture to get through the seed coat and give good germination. In dry conditions and on heavy soils, soil aggregate size influences the potential for this. Where soil structure is good, it

can usually be drilled without any further action. However, some soils will need some help, as compaction inhibits oilseed rape root growth and limits its access to moisture and nutrients.

Any restructuring done for oilseed rape should have benefits for future crops, helping to spread the cost of the operation. A good soil structure that allows water infiltration will also

reduce the risk of any herbicide run-off and help to protect watercourses – something becoming increasingly important for preventing restrictions on their use. Assessing soil structure

should start with the previous crop, or just after harvest, explains Philip Wright, independent consultant at Wright Resolutions, who suggests the following steps: * Dig down with a spade to

look at soil profile * Identify where there is a compacted layer * Plan the timing of restructuring to suit soil moisture – if it’s too wet, it won’t work * Cultivate to the appropriate

depth to deal with any problem * Dig down afterwards to check results “It’s all about providing the optimum conditions for crop growth,” he explains. “With oilseed rape, you are placing the

seed at a precise depth, which you can’t do with a cloddy seed-bed or where there’s a compacted layer. “Remember too that residue management can affect establishment, especially if surface

trash is poorly distributed.” © Tim Scrivener SOWING DEPTH A consistent sowing depth is more important than the actual depth – with the season and conditions also playing their part. For

most conditions, seed should be sown at a depth of 2-3cm, and no deeper than 5cm. Variable sowing depth means there is likely to be patches of delayed or failed growth, having a detrimental

effect on growth and creating management issues throughout the season. Consolidation is also important, as it helps to retain moisture, ensures good seed-to-soil contact and assists with

slug control. It also ensures optimum performance where soil applied herbicides are used. In dry conditions, seed should be sown as soon as possible after cultivations to minimise soil

moisture loss, followed by rolling. DRILLING DATE Winter oilseed rape is mainly drilled between mid-August and mid-September in England, with crops in Scotland going in from mid-August to

early September. High yields can be achieved from drilling at any of these times, but a significant yield reduction is more likely with crops drilled after mid-September. Based on average

temperatures in England, crops sown in August will take about 10 days to emerge, while those sown in September will take 14 days. Oilseed rape needs 90C days for germination and 140C days

for one pair of leaves. SEED RATE AND PLANT POPULATION Seed rates should be geared to achieving about 25-35 plants/sq m for both hybrid and conventional varieties. The seed rate necessary to

achieve this target will depend on the percentage plant establishment – which in turn depends on the conditions and slug pressure. Predicting plant establishment is difficult, but rates

tend to range from 50-80%, with 70-80% being typical in most seasons. The practice of allowing some margin for uncertain weather and pest pressures has resulted in a wide range of seed rates

being used on-farm. In general, conventional varieties are sown at 50-120 seeds/sq m, while hybrids go in at 50-70 seeds/sq m. Where 70-80% establishment is being achieved, the optimum seed

rate is 35-40 seeds/sq m. However, there is scope to reduce seed rates, believes Pete Berry of Adas, as the crop has good ability to compensate for lower plant populations and is less

likely to lodge in these conditions. Thick crops are at risk from weaker stems, poor light penetration and higher light reflectance – which may reduce yields. In contrast, going too low with

seed rates risks there not being enough pods or seeds to produce a reasonable yield. “It’s interesting to note the two top performers in the YEN competition both achieved very high yields

from low plant populations. “One of them sowed 30 seeds to get 15 plants/sq m, while the other sowed 45 seeds to get 30 plants/sq m.” INCREASING ROW WIDTH Establishing oilseed rape in rows

wider than 30cm apart has become more common in recent years. Adas work suggests row width can be increased up to 48cm, without affecting yields. Going from 48cm up to 72cm did reduce yield

potential. Where seed rates higher than 60 seeds/sq m are used, there is potential for a high degree of plant crowding and competition within the rows. Wider rows also leave an amount of

soil unprotected, increasing the risk of weeds germinating and soil run-off. In wider rows, the optimum plant population is lower than that for crops sown in traditional row spacings. With

some systems, growers now work to a target plant number/linear metre, to get the right population for high yields.