Analysis of human metabolism by reducing the complexity of the genome-scale models using redhuman

Analysis of human metabolism by reducing the complexity of the genome-scale models using redhuman

Play all audios:

Loading...

ABSTRACT Altered metabolism is associated with many human diseases. Human genome-scale metabolic models (GEMs) were reconstructed within systems biology to study the biochemistry occurring


in human cells. However, the complexity of these networks hinders a consistent and concise physiological representation. We present here redHUMAN, a workflow for reconstructing reduced


models that focus on parts of the metabolism relevant to a specific physiology using the recently established methods redGEM and lumpGEM. The reductions include the thermodynamic properties


of compounds and reactions guaranteeing the consistency of predictions with the bioenergetics of the cell. We introduce a method (redGEMX) to incorporate the pathways used by cells to adapt


to the medium. We provide the thermodynamic curation of the human GEMs Recon2 and Recon3D and we apply the redHUMAN workflow to derive leukemia-specific reduced models. The reduced models


are powerful platforms for studying metabolic differences between phenotypes, such as diseased and healthy cells. SIMILAR CONTENT BEING VIEWED BY OTHERS GENOME-SCALE MODELS IN HUMAN


METABOLOGENOMICS Article 19 September 2024 COMPUTATIONAL MODELING OF CANCER CELL METABOLISM ALONG THE CATABOLIC-ANABOLIC AXES Article Open access 10 May 2025 AN AUTOMATED NETWORK-BASED TOOL


TO SEARCH FOR METABOLIC VULNERABILITIES IN CANCER Article Open access 11 October 2024 INTRODUCTION An altered metabolism is a hallmark of several human diseases, such as cancer, diabetes,


obesity, Alzheimer’s, and cardiovascular disorders1,2. Understanding the metabolic mechanisms that underlie this reprogramming guides the discovery of new drug targets and the design of new


therapies. To this effect, tremendous efforts are now being made to use the large amounts of now-available multi-omics experimental data to gain insight into the metabolic alterations


occurring in different phenotypes. Unfortunately, current mathematical models can be too complex for this analysis, rendering them too cumbersome to employ for many systems biology studies.


In the field of systems biology, genome-scale metabolic models (GEMs) integrate available omics data with genome sequences to provide an improved mechanistic understanding of the


intracellular metabolism of an organism. GEMs have been reconstructed for a large diversity of organisms spanning from bacteria to mammals3,4,5 and are valuable tools for studying


metabolism6,7. The mathematical representation of GEMs through the stoichiometric matrix7 is amenable to methods such as flux balance analysis (FBA)8 and thermodynamic-based flux balance


analysis (TFA)9,10,11,12,13, which ensure that the modeled metabolic reactions retain feasible concentrations and their directionalities obey the rules of thermodynamics, to predict reaction


rates and metabolite concentrations when optimizing for a cellular function, such as growth, energy maintenance, or a specific metabolic task. Additionally, GEMs can be used for gene


essentiality14, drug off-target analysis15, metabolic engineering16,17,18, and the derivation of kinetic models19,20,21,22. The first human GEM was reconstructed in 200723,24. Since then,


the scientific community has been working to develop high-quality human GEMs, including HMR 2.025, Recon 226, Recon 2.227, and Recon 3D28. The human GEMs used for the analysis in this


article are Recon 2 and Recon 3D. Recon 2 is composed of 7440 reactions with 4821 of them associated to 2140 genes, and 2499 unique metabolites across seven compartments: cytosol,


mitochondria, peroxisome, Golgi apparatus, endoplasmic reticulum, nucleus, and lysosome. Recon 3D is the latest consensus human GEM. It is an improved more comprehensive version of the


previous GEMs consisting of 10,600 reactions, with 5938 of them associated with 2248 genes, and 2797 unique metabolites compartmentalized as Recon 2 with an additional compartment for the


mitochondria intermembrane space. Human GEMs reconstruct the metabolic reactions occurring in several human cell types. However, a given cell type only leverages a portion of these


reactions. This motivates the development of methods to generate context-specific metabolic models that can be used to study the differences in metabolism for different cell types29, for


healthy and diseased cells30,31, and for cells growing under diverse extracellular conditions. Some examples of such methods are (1) GIMME32, mCADRE33, and tINIT34 to reconstruct


tissue-specific models based on _omics_ data and a set of tasks or a specific objective function; (2) redGEM–lumpGEM35,36 to reconstruct models around a specific set of subsystems of


interest for the study; and (3) iMM37,38 to characterize the extracellular medium and the metabolites that are essential for growth under each condition. Context-specific metabolic models


have been extensively used to understand the differences in metabolism between cancer cells and their healthy counterparts39,40,41,42,43,44,45. In this article, we present redHUMAN, a


workflow to reconstruct thermodynamic-curated reductions of the human GEMs Recon 2 and Recon 3D. We integrate the thermodynamic properties of the metabolites and reactions into the GEMs and


use redGEM–lumpGEM to reconstruct reduced models around specific subsystems. Furthermore, we introduce redGEMX, a method to identify the pathways required to connect the extracellular


compounds to a core network. redGEMX guarantees that the reduced models have all the feasible pathways that consume and produce the components of the extracellular environment of the cell.


Finally, we use metabolic data for leukemia as an example of how to integrate experimental data to derive disease- and tissue-specific metabolic models. RESULTS OVERALL WORKFLOW In order to


generate reduced models from human GEMs, we developed redHUMAN, a six-step workflow that can be applied to any GEM or desired model system. The overall workflow is briefly described here and


shown in Fig. 1, and the details of each step in its application to the human GEMs Recon 2 and Recon 3D to generate thermodynamic-curated reductions are provided in the subsequent sections.


For the workflow, the thermodynamic information for compounds and reactions, which is assembled from earlier studies or estimated using established group contribution methods, is first


integrated into the GEM. Second, the subsystems, or families of pathways with a specific functional role for a biological process, are selected based on the objectives of the specific study.


These pathways are explicitly represented and constitute the core of the reduced model. For example, when studying cancer metabolism, this can include reported subsystems that are


deregulated in cancer cells in addition to the standard central carbon pathways. Third, these subsystems are expanded using reacti\ons from the GEM to create a connected core network. In


this step, we include every reaction that connects core metabolites and that is not a member of the formal definition of the selected subsystems in the core model. In steps four and five, we


include the shortest pathways to connect the extracellular metabolites from the defined medium as well as the shortest pathways to generate the biomass components from the core network.


These steps guarantee that the model has all pathways that are essential for survival and growth of the cells based on the availability of nutrients. In the sixth step, experimental data for


a specific physiological state is integrated in the model, and the final model is verified through checks that ensure the consistency of the reduced model with the original GEM.


THERMODYNAMIC CURATION OF THE HUMAN GEMS (STEP 1) We first determine the directionality of the chemical reactions of the network, which is directly associated with their corresponding Gibbs


free energy. The Gibbs free energy of a reaction can be estimated from the thermodynamic properties of its reactants and products. Therefore, we curated the GEMs Recon 2 and Recon 3D (see


“Methods”) and integrated the thermodynamic properties for 52.4% of the 2499 unique metabolites from Recon 2 and 67.5% of the 2797 unique metabolites from Recon 3D (Fig. 2a and Supplementary


Data 1). Three main reasons prevented the estimation of the thermodynamic properties of the metabolites: (1) an unknown molecular structure (SMILE), (2) an incomplete elemental description


(for example, an R in the structure), and (3) groups in the structure for which an estimated free energy does not exist (for example, >N− group). We observed that as the number of


metabolites increases from Recon 2 to Recon 3D, the percentage of thermodynamic coverage increases as well. This is due to the improved annotation of the metabolite structures in Recon 3D.


Using the thermodynamic properties of the compounds as constraints (see “Methods”), we estimated the Gibbs free energy for 51.3% of the 7440 reactions present in Recon 2 and 61.6% of the


10,600 reactions in Recon 3D. These constraints ensured that the reactions in the computed flux distributions operated in thermodynamically feasible directions. SUBSYSTEM SELECTION TO BUILD


THE CORE (STEP 2) A proper metabolic model contains the pathways that are essential for the survival of the cell as well as the pathways that are informative of a specific metabolic


behavior. In this work, we were interested in the metabolism of cancer cells. Thus, we selected as core subsystems: (a) the central carbon pathways that provide the energy, redox potential,


and biomass precursors, and (b) the subsystems that have been reported to be altered in cancer cells46,47,48,49. Consequently, the core subsystems for our models were glycolysis, pentose


phosphate pathway, citric acid cycle, oxidative phosphorylation, glutamate metabolism, serine metabolism, urea cycle, and reactive oxygen species detoxification. We have estimated the


thermodynamic properties for the metabolites and the reactions in these initial subsystems. In the case of Recon 2, we provide an estimate for the Gibbs free energy of formation for 236


metabolites (94.4% of the total in the initial subsystems) and the Gibbs free energy of reaction for 143 reactions (83.1% of the reactions in the initial subsystems). In the case of Recon


3D, we provide estimated values of the thermodynamic properties for 288 metabolites (97.6%) and for 183 reactions (91.0%). NETWORK EXPANSION (STEP 3) Subsequently, to reconstruct the core


network we pairwise connected the chosen subsystems using redGEM (see “Methods”). The algorithm first performed an intra-expansion of the initial subsystems. In this process, each initial


subsystem was expanded to include additional reactions from the GEM whose reactants and products belong to that subsystem. These reactions can be assigned to different subsystems in the GEM


which are not any of the initial subsystems and the core network would miss these additional reactions if we had considered the formal definition of the initial subsystems. The initial core


subsystems of Recon 2 contained a total of 180 reactions. After the intra-expansion, 135 reactions from 21 subsystems were added. Examples of these added reactions included three from


pyruvate metabolism that interconvert acetyl-CoA, acetate, malate, and pyruvate, which are all metabolites that participate in the citric acid cycle subsystem. For Recon 3D, 171 reactions


from 24 subsystems were added to the 211 reactions from the initial core subsystems. Next, the algorithm performed a directed graph search to find the reactions from the GEM that connected


the subsystems for different degrees _D_ (Fig. 2b and Supplementary Table 1), wherein _D_ represents the distance (in number of reactions) between pairs of metabolites from the subsystems.


Our final models included the connections for degree _D_ = 1, that is, all the reactions that in one step connect two metabolites (excluding cofactors) belonging to any of the initial


subsystems. A degree _D_ = 1 was enough to pairwise connect all the initial subsystems (Fig. 2c). This resulted in a Recon 2 core network of 356 metabolites and 617 reactions and a Recon 3D


core network of 440 metabolites and 796 reactions. EXTRACELLULAR MEDIUM CONNECTION (STEP 4) Cells adapt their metabolism to the available nutrients in their extracellular environment.


Consequently, a correct definition of the medium in the metabolic model is fundamental for an adequate representation of the intracellular metabolism. Given the complexity of the


extracellular medium, it is particularly important to identify and classify the essentiality of the medium components and the pathways used for their metabolism. To this end, we curated the


representation of the interactions of the cell with its environment into the human GEMs. First, we did not allow the exchange of intracellular metabolites lacking associated transport


reactions or transport molecules containing P, CoA, or ACP (acyl carrier protein). Secondly, we allowed the synthesis of generic fatty acids from palmitate, with reactions from Recon 2 and


Recon 3D (Supplementary Note 1). We next characterized the in silico minimal medium composition required for growth in the human GEMs by applying iMM (see “Methods”), which identifies the


minimal set of metabolites that need to be uptaken to simulate growth. The results showed that Recon 2 required a medium with glucose, the nine essential amino acids, and some inorganics


(PO4, NH4, SO4, O2), and Recon 3D simulated growth in a medium with glucose, the nine essential amino acids, the same inorganics as Recon 2, and one of the two essential fatty acids


(alpha-linolenic acid and linoleic acid). The presence of the two essential fatty acids in the iMM of Recon 3D is a consequence of the improvement of the lipid metabolism28, where the


essential fatty acids participate in the synthesis of phospholipids. This demonstrates how the algorithms and workflow can be used to compare and validate updated model reconstructions for


the same organisms or between different organisms. Seeking to identify the pathways that human cells use to uptake and secrete extracellular metabolites, we next developed the method redGEMX


(see “Methods”). This algorithm finds the pathways from the GEM that are needed to connect the extracellular metabolites to the core network defined by redGEM. In this work, we considered a


complex medium composition of 34 metabolites (Fig. 3a), and redGEMX found the corresponding GEM reactions that connected 26 of these extracellular metabolites (we excluded the inorganics


and the fatty acids) to the core network. An example of one of these connected metabolites is the essential amino acid l-histidine which affects many aspects of human physiology, including


cognition functions and allergic reactions. The classical pathway to metabolize l-histidine consists of four steps that sequentially convert it into urocanate, 4-imidazole-5-propanoate,


N-formimidoyl-l-glutamate, and ultimately, l-glutamate50. Interestingly, the resulting redGEMX subnetwork for l-histidine uses this classical pathway to connect it to the Recon 2 core


metabolites l-glutamate and 4-aminobutanoate, both from the subsystem glutamate metabolism. The subnetwork is composed of 22 reactions, and it contains not only the classical pathway but


also all the additional reactions required to balance the cofactors and by-products (Fig. 3b). These additional reactions are essential for an active main pathway, as they include the


utilization of NH4, the sources of water and tetrahydrofolate, and the conversion of the by-product 5-formiminotetrahydrofolate to 10-formyltetrahydrofolate, which regenerates


tetrahydrofolate. Cellular metabolism has evolved to give flexibility to the cells to survive and function under different conditions. This flexibility is captured in the metabolic networks


with the existence of alternative pathways. For this reason, using redGEMX we found three alternative pathways of minimum size (22 reactions) to connect l-histidine to the core network of


Recon 2. The alternatives emerge from the existence of different transport reactions for the extracellular metabolites. In the case of Recon 3D, l-histidine is connected to the core network


using 20 reactions, and there exist two pathways of minimum size. The subnetworks connect l-histidine to the Recon 3D core metabolites l-glutamate, 5-10-methylenetetrahydrofolate,


2-oxoglutarate, and pyruvate using the classical pathway to metabolize l-histidine. The different topology of the Recon 2 and Recon 3D networks manifests in differences in the pathways used


to metabolize and synthesize the compounds, thus, it is important to characterize which are the pathways used in the models. Following this approach, we added the reactions that compose all


the alternative subnetworks of minimum size to the core networks to connect the 26 extracellular metabolites (Supplementary Table 2 and Supplementary Data 2). The subnetworks generated with


redGEMX provide a new perspective on the current understanding of metabolic pathways, as they not only contain the main pathway but they also include other reactions necessary to supply and


consume all the cofactors and by-products. Moreover, the alternatives can be used to hypothesize which pathways cells use when growing under different conditions, such as when different


nutrients are present in the environment or under different intracellular regulations when different enzymes are operational. If metabolomics data are available, the subnetworks generated


with redGEMX can be classified based on pathway favorability as it has been recently done in refs. 9,51,52. BIOSYNTHETIC REACTIONS GENERATION (STEP 5) Cellular metabolic functions, such as


growth, structure maintenance, and reproduction, require the synthesis of several metabolites. In metabolic models, this is represented using the biomass reaction53, whose reactants, named


biomass building blocks or BBBs, are the metabolites that the cell needs to survive and perform its functions. Therefore, the last step necessary for reconstructing the reduced models is the


integration of the pathways necessary to synthesize the 37 BBBs that compose the defined biomass in Recon 2 and Recon 3D. Among them, 19 are uptaken directly from the extracellular medium


or produced within the core network. To find the minimum number of reactions in the GEM that we need to add to the core network for the synthesis of the remaining 18 BBBs, we used lumpGEM


(see “Methods”). Similarly to redGEMX, lumpGEM generates subnetworks that account for the synthesis, degradation, and balancing of all the by-products and cofactors required by the main


pathway. The alternative subnetworks generated with lumpGEM can assess the flexibility of the cells to use alternative pathways to produce the BBBs, which can lead to survival in different


conditions and drug resistance. Using lumpGEM, we calculated all the alternative subnetworks (set of reactions) of minimum size to capture the flexibility of the network for the biosynthesis


of the BBBs (Fig. 4a, Supplementary Table 3, and Supplementary Data 3). The reactions that compose each of these subnetworks were summed up together to form an overall reaction that


represented the subnetwork. These lumped reactions were then added to the core network. The subnetworks generated with lumpGEM have the same size and number of alternatives in both Recon


models for most of the BBBs, indicating that both models have the same level of flexibility for synthesizing the BBBs, with the exception of l-cysteine, dTTP and the purine nucleotides (ATP,


GTP and their deoxy equivalents), cholesterol, and the phospholipids and sphingolipids. The core network of Recon 2 contains a reaction that produces l-cysteine, however, the core network


of Recon 3D requires two reactions to produce it. The subnetworks that produce dTTP have the same size in both models, but a different number of alternatives. The subnetworks to produce the


purine nucleotides have one more reaction and more alternatives in Recon 3D. Cholesterol is another BBB whose subnetworks agree in size for both models, but Recon 3D has more alternatives


than Recon 2. The explosion of alternatives in Recon 3D is due to the parallel description of the synthesis of cholesterol in three compartments, namely cytosol, peroxisome, and endoplasmic


reticulum. The differences in the lumped reactions for the phospholipids and sphingolipids between both models are due to the introduction of the essential fatty acid in their synthesis in


Recon 3D. As an example of the subnetworks that produce the BBBs, we show the synthesis of the phospholipid phosphatidylserine (Fig. 4b, c). The standard KEGG pathway54 for the synthesis of


phosphatidylserine comprises four steps, wherein glycerol 3-phosphate is converted to lysophosphatidic acid, phosphatidic acid, CDP-diacylglycerol, and phosphatidylserine. In Recon 2, the


subnetwork generated with lumpGEM for the synthesis of phosphatidylserine was composed of eight reactions. It included the KEGG pathway with the exception of the CDP-diacylglycerol


intermediate, which was not connected to phosphatidylserine in the GEMs. Instead, phosphatidylserine was produced directly from phosphatidic acid by attaching serine. Additionally, the


subnetwork contained the reactions required to generate from acetyl-CoA the fatty acids that would attach to glycerol 3-phosphate and to lysophosphatidic acid, which are important to


consider for the final synthesis of phosphatidylserine. All the reactions involved in the synthesis of phosphatidylserine were lumped together in one reaction. For Recon 3D, the


phosphatidylserine synthesis subnetwork was generated with the same eight reactions, but in this case, four alternative subnetworks existed (Fig. 4c and Supplementary Table 4), indicating


that Recon 3D has a higher flexibility in producing this BBB. The alternatives emerged from the presence of two reactions in Recon 3D that could be substituted by two other reactions in the


subnetwork. One of these reactions arose from the participation of the essential fatty acid linoleate in phospholipid generation, resulting in an alternative form of synthesizing one of the


tails of phosphatidic acid. Specifically, the reaction ARTPLM2, which converts palmitoyl CoA into a generic fatty acid, is not required, and instead, the essential fatty acid linoleate is


transported from the extracellular medium, transformed into linoleyl-coA and attached to the lysophosphatidic acid to form phosphatidic acid. Because the core network of Recon 3D included a


reaction that transforms phosphatidylcholine in phosphatidylserine, the other substitution occurred in the last step, where serine was replaced by choline and phosphatidylcholine was


synthesized. The lumped reactions can be classified based on the thermodynamic favorability of their subnetworks, if metabolomics data are available, as in refs. 9,51,52. The analysis


performed with lumpGEM allows to characterize and classify the metabolic pathways and their alternatives, leading to an in-depth understanding of the flexibility of metabolism. In the


context of GEMs, such detailed analysis of the subnetworks is often a difficult task due to their large size and interconnectivity. By applying the redHUMAN workflow, we reconstructed four


reduced metabolic models for human metabolism (Table 1). Two of them have Recon 2 as the parent GEM, and the other two are generated from the Recon 3D GEM. For both GEMs, we generated one


model with the minimum set of pathways required to simulate growth, that is, one lumped reaction per BBB with subnetworks of minimum size, and another model with higher flexibility


containing all the alternative pathways of minimum size required to simulate growth. The reduced models have a thermodynamic coverage of more than 92% of the compounds and more than 61% of


the reactions. DATA INTEGRATION AND METABOLIC TASKS (STEP 6) Once the reduced models were generated, we investigated the metabolic tasks captured by the reduced models and we identified how


the models should be curated to recover the tasks that they could not perform. First, we sequentially tested in the generated reduced models the thermodynamically feasibility of 57 metabolic


tasks defined by Agren et al.34. The four models captured 45 of the 57 tasks, including rephosphorylation of nucleoside triphosphates, uptake of essential amino acids, de novo synthesis of


nucleotides, key intermediates and cholesterol, oxidative phosphorylation, oxidative decarboxylation, and growth (Fig. 5a). The tasks not captured by the models encompassed the synthesis of


protein from amino acids, beta oxidation of fatty acids, inositol uptake, and vitamin and co-factor metabolism. We classified the causes behind their limitation into two categories: (1) the


model reconstruction, specifically the definition of the biomass, or (2) the reduction properties, that is, the subsystems included in the reduction and the representation of parts of the


network as lumped reactions. To recover these tasks such that they are captured by the model, the following actions should be performed: the synthesis of proteins from amino acids and


vitamin and co-factor metabolism can be recovered by modifying the biomass to account for their synthesis and utilization; the inclusion of lipid metabolism subsystems can recover the beta


oxidation of fatty acids; and finally, the utilization of inositol can be recovered by adding the explicit reactions that compose the subnetworks, as it was found to be hidden in the lumped


reactions of phosphatidyl-inositol. This demonstrates that redHUMAN allows to build reduced models consistent not only with the GEM but also with the metabolic tasks, and these models are


suitable for targeted modifications and expansions. We next demonstrated how generic reduced models were used to integrate data to study disease physiology. We first integrated experimental


data from the NCI60 cell lines in the reduced models to define the physiology of leukemia cells. In particular, we considered the exometabolomics of the cell lines HL-60, K-562, MOLT-4,


CCRF-CEM, RPMI-8226, and SR, which correspond to leukemia40,55. Additionally, we limited the maximal growth to the doubling time reported for leukemia cells, which is 0.035 h−1, and we


constrained according to literature values the maximum uptake rate of oxygen to 2 mmol·gDW−1·h−1 40 and the ATP maintenance to 1.07 mmol·gDW−1·h−1 56 (Supplementary Tables 5 and 6). We


tested that all the models achieved the maximum growth when maximizing for the biomass reaction using TFA. Next, to analyze the impact that the deletion of each gene had on the network, we


performed in silico gene knockout by artificially removing a gene and measuring how the network was affected. The genes whose knockout prevented the synthesis of biomass could then be


investigated as potential targets for limiting cell proliferation. The consistency of the workflow used to generate the reduced models ensures that they capture the essentiality from the


GEM, that is, the genes that are part of the reduced models and are essential in the GEM they are also essential in the reduced model (Fig. 5b and Supplementary Tables 7 and 8). Furthermore,


the reduced models allow the assignment of functionality to the essential genes using the lumped reactions. For example, the gene _GART_ is associated with the enzymes


phosphoribosylglycinamide formyltransferase, phosphoribosylglycinamide synthetase, and phosphoribosylaminoimidazole synthetase, which are all part of the subnetworks for the synthesis of the


nucleotides ATP, GTP, dATP, and dGTP. Silencing this gene prevents the synthesis of these BBBs, and consequently, the models cannot synthesize biomass. Finally, because the model reduction


affects the flexibility of the network with respect to the GEM, we performed thermodynamic flux variability analysis (TVA) on the common reactions between the GEM and the reduced model. The


top 20 reactions whose rate ranges changed the most in absolute value included reactions from glycolysis, the pentose phosphate pathway, folate metabolism, and nucleotide interconversion


among others (Fig. 5c). For reactions such as phosphoglycerate kinase (PGK), transaldolase (TALA), and methenyltetrahydrofolate cyclohydrolase (MTHFC), the ranges of reaction rates in the


reduced model decreased with respect to the corresponding reaction rates in the GEM. Some reactions, such as nucleoside-diphosphate kinase (NDPK9), were bidirectional in the GEM and became


unidirectional in the reduced models. On the other hand, there were also reactions such as fumarase, (FUM) lactate dehydrogenase (LDHL), or ribose-5-phosphate isomerase (RPI) whose flux


ranges fully agreed between the reduced model and the GEM. Interestingly, if we look at the percentage of rate flexibility change, the reactions from the initial subsystems did not


experience a large relative change in their rates, with the exception of the reactions whose participants are precursors for the lumped reactions of the BBBs as their reaction rates are now


constrained closer to the physiological state. A final calibration of the models is done using the transcriptomics data from the NCI data repository


(https://www.ncbi.nlm.nih.gov/sites/GDSbrowser?acc=GDS4296) for the corresponding leukemia cell lines. We have identified that, in the four models presented in this study, over 99% of the


enzymes with gene associations (more than 75% of the total enzymes) are expressed in the NCI60 leukemia cell lines (Supplementary Table 9). This suggests that the pathways selected for


initializing and expanding the metabolic core network are highly relevant for the specific physiology, which are also consistent with the important pathways identified in the experimental


and medical studies46,48,57. PHYSIOLOGY ANALYSIS redHUMAN helps to navigate large human genome-scale metabolic models to explore and classify the metabolic pathways that cells use to


function and survive under specific conditions. The thermodynamic curation performed in the genome-scale models guarantees that the reactions obey the laws of thermodynamics, discarding


possible pathways that would not be compatible with the bioenergetics of the cell. As an example of how thermodynamics reduces the space of solutions to the thermodynamically feasible


pathways, we analyzed the flux variability with and without thermodynamic constraints in the Recon 3D reduced model that has all the alternative lumped reactions of minimum size (Smin). The


reactions l-glutamate 5-semialdehyde dehydratase (from arginine metabolism) and l-glutamate 5-semialdehyde:NAD+ oxidoreductase (from urea cycle) are bidirectional when flux variability is


performed without thermodynamics and become unidirectional when their thermodynamic information is taken into account. Therefore, integrating thermodynamic information reduces the space of


reaction directionality and the physiological solution space, and it eliminates thermodynamic infeasible reactions, excluding some pathways. The leukemia-specific models generated in this


study are powerful tools to analyze how the metabolic pathways are altered with respect to other cancer cells or normal cells. In particular, we can analyze how leukemia cells utilize the


nutrients available in the microenvironment to biosynthesize the precursors required for growth and cellular functionality. As an example, we identified the minimal number of reactions that


are required for the synthesis of phosphatidyl-serine in the reduced Recon 3D model with all the alternative lumped reactions of minimum size. We found that at least 76 reactions should be


active for the production of phosphatidyl-serine including the interactions with the extracellular medium, i.e., for some alternatives the uptake of glucose, histidine, linoleic acid,


oxygen, and phosphate, and the secretion of succinate, ammonia, carbon dioxide, and water. The main pathways active within the subnetwork of 76 reactions are glycolysis, the citric acid


cycle, serine metabolism, and the electron transport chain. This type of analysis will enlighten our knowledge on how cells adapt their metabolism to the microenvironment allowing


researchers to hypothesize how and why the cancer cells change their expression profile to adapt and survive. DISCUSSION For a better understanding of the altered metabolisms that accompany


many human diseases, we have herein presented a workflow to generate reduced models for common human GEMs that can reduce the complexity of these systems to the relevant processes to be


studied, making detailed in silico analyses of metabolic changes possible. During the last years, there has been an increased generation of metabolomics data that better study what is


happening in the physiology of cell metabolism compared to other omics data. This has created a need to expand the classical constraint-based modeling methods to include metabolomics


information. Our thermodynamic formulation and application of TFA12,51,58,59 in redHUMAN allows to integrate endo- and exo-metabolomics in the models, constraining the concentration of the


metabolites according to physiological data. The size of the model is directly related to the percentage of metabolites that need to be measured. Therefore, the continuous expansion in the


size of genome-scale models increases the demand of larger sets of metabolomics, and such data are not always available. In addition, there is a community effort to expand constraint-based


models to include information on enzyme abundancy relating the metabolic fluxes with enzymatic data and allowing to integrate transcriptomics and proteomics data into the models. These data


are currently limited, but they can be continuously updated and integrated as they become available60,61. Moreover, most of the existing methods to build context-specific models are


data-driven, that is, the reduced models are extracted from a GEM by considering only the enzymes associated to highly expressed data, or literature-based pathways. Then, they include


additional reactions that are required to simulate growth and cellular functions33,34,62. The main difficulty with these methods is the large amount of data required to fully characterize


the initial set of reactions or core reactions. The lack of data could lead to unconnected parts and the impossibility to include reactions that could be important for the specific


physiology, affecting the final model and the predictions. redHUMAN reconstructs reduced models considering only the pathways of interest and their stoichiometric connectivity. The reduced


models are built unbiased from the data, guaranteeing thermodynamic feasibility and consistency with the GEM and the metabolic tasks. The reduced models can then be used to construct


context-specific models by integrating omics data, accommodating to also integrate partial data without sacrificing reactions from the network. Overall, the reduced size of the new models


and their conceptual organization overcomes some of the main challenges in building genome-scale context-specific models as for example, the barrier of data network coverage. The reduced


models generated with redHUMAN are powerful representations of the specific parts of the network, and they have promising applications as they are suitable to use with existing methods


including MBA62, tINIT34, mCADRE33, uFBA63, GECKO64, ETFL65, TEX-FBA66, and IOMA67. Based on our results, we propose the following approach to using these models as tools to explain and


compare phenotypes. First, generate a reduced model around a desired set of subsystems and for a defined extracellular medium, and check that the model captures the metabolic tasks.


Subsequently, build physiology-specific models by integrating experimental data into the reduced models. Then, test the consistency of the reduced network with respect to its parent GEM.


Finally, integrate different sets of omics data, including expression, to compare different physiologies, such as diseased vs healthy or within several types of cancers. This approach will


help to better investigate the alterations in metabolism that occur as diseases develop and progress. Moreover, the same procedure can be used to analyze systematically and consistently


metabolic models for the same organism and to compare metabolic models of different organisms, enhancing our understanding of their similarities and differences. Throughout this paper, we


have considered a specific set of subsystems, a specific medium, and the biomass definition from the GEMs. In the future, the reduced models could be further expanded to include other


pathways, a more complex medium, or more biomass components. To introduce new subsystems or pathways into the core network, redGEM should be run to find the pairwise connections between the


added pathways and the rest of the core. For an expansion of the medium, redGEMX would find the connections necessary for using the new extracellular metabolites. In a similar manner, a


further curation of the biomass reaction could increase the number of BBBs, requiring lumpGEM to be run to find the biosynthesis pathways for those compounds. If a higher consistency was


required between the GEM and the corresponding reduction, we could find the reactions missing in the reduced model to satisfy that condition. Moreover, we have selected a set of metabolic


tasks to test the generated reduced model based on the definition within the original GEM. However, these sets of tasks can be expanded or redefined according to the needs of the specific


studies, which can be based on expert knowledge or experimental data, as done in ref. 68. Furthermore, in this study, we have used metabolomics, proteomics, and growth data from the NCI60


cell lines to define a generic physiology for leukemia cells. The core networks of the reduced models are structurally the same across growth conditions and depend only on the structure of


the corresponding GEMs. Therefore, these generic models are robust to variations in growth or data for the same physiology, and thus data for individual leukemia cell lines can be used


without changing the workflow. However, if there are important differences in the data, for example across different physiological conditions, the authors suggest running the lumpGEM


workflow with data integration and generate alternative subnetworks and lumped reactions, which in turn will capture the different flux profiles for each physiological state. Overall, our


analysis demonstrates how redHUMAN facilitates the characterization of differences in metabolic pathways across models and phenotypes. METHODS THERMODYNAMIC CURATION OF THE GENOME-SCALE


MODELS (GEMS) The thermodynamic curation of the human GEMs Recon 2 and Recon 3D aims to include thermodynamic information, i.e., the Gibbs free energy of formation for the compounds and the


corresponding error for the estimation, into the model. The workflow to obtain this information is as follows. We first used MetaNetX (http://www.metanetx.org)69 to annotate the compounds of


the GEMs with identifiers from SEED70, KEGG54, CHEBI71, and HMDB72. We then used Marvin (version 18.1, 2018, ChemAxon http://www.chemaxon.com) to transform the compound structures


(canonical SMILES) into their major protonation states at pH 7 and to generate MDL Molfiles. We used the MDL Molfiles and the Group Contribution Method to estimate the standard Gibbs free


energy of the formation of the compounds as well as the error of the estimation59. Since the model for Recon 3D already incorporates the structure for 82% of the metabolites in the form of


SMILES, we used those SMILES and followed the previous workflow from the point of obtaining the major forms at pH 7 using Marvin. Furthermore, we have integrated in the models the


thermodynamic properties for the compartments of human cells, including, pH, ionic strength, membrane potentials, and generic compartment concentration ranges from 10 pM to 0.1 M


(Supplementary Table 10). THERMODYNAMICS-BASED FLUX ANALYSIS (TFA) TFA estimates the feasible flux and concentration space according to the laws of thermodynamics11,12,13. TFA is formulated


as a mixed-integer linear programming (MILP) problem that incorporates the thermodynamic constraints to the original FBA problem. The Gibbs free energy of the elemental and charge balanced


reactions is calculated as a function of the standard transformed Gibbs free energy of formation (depending on pH and ionic strength) and the concentrations of the products and reactants.


Considering a network with _m_ metabolites and _n_ reactions, the Gibbs free energy,\(\Delta _r{\mathrm{G}}_i^\prime ,\) for reaction _i_ is: $$\Delta _r{\mathrm{G}}_i^\prime = \mathop {\sum


}\limits_{j = 1}^m n_{i,j}\Delta _f{\mathrm{G}}_j^{\prime o} + RT\ln \left( {\mathop {\prod }\limits_{j = 1}^m x_j^{n_{i,j}}} \right),$$ (1) where \(i = 1, \ldots ,n,j = 1, \ldots ,m.\)


_n__i,j_ is the stoichiometric coefficient of compound _j_ in reaction _i_; \(\Delta _f{\mathrm{G}}_j^{\prime o}\) is the standard Gibbs free energy of formation of compound _j_; _x__j_ is


the concentration of the compound _j_, _R_ is the ideal gas constant, \(R = 8.31 \cdot 10^{ - 3}\frac{{\mathrm{KJ}}}{{\mathrm{K}}\;{\mathrm{mol}}}\), and _T_ is the temperature. In this


case, _T_ = 298 K. The value of the Gibbs free energy determines the directionality of the corresponding reaction and the thermodynamically feasible pathways. With this formulation, we


included the concentrations of the metabolites as variables in the mathematical formulation. TFA allows the integration of metabolomics data into the model. CHARACTERIZING THE EXTRACELLULAR


IN SILICO MINIMAL MEDIA (IMM) iMM is formulated as a MILP problem that introduces new variables and constraints to the TFA problem to find the minimum set of extracellular metabolites


necessary to simulate growth or a specific metabolic task with the GEM37,38. iMM identifies the minimum number of boundary reactions (uptakes and secretions) that need to be active. The


method defines new binary variables in the TFA problem that represent the state of each boundary reaction, active or inactive. New constraints link the new binary variables to the


corresponding reaction rates such that if the reaction is inactive, then it should not carry flux. The objective of the problem is to maximize the number of inactive reactions. Assuming a


network with _m_ metabolites and _n_ reactions, the mathematical formulation of the iMM problem is the following: $$\begin{array}{*{20}{c}} {\mathrm{objective}}\;{\mathrm{function}} &


{\max \mathop {\sum }\limits_{k = 1}^{n_b} z_k} & {} \\ {} & {} & {} \\ {} & {{\mathrm{subject}}\;{\mathrm{to}}} & {} \\ {\mathrm{FBA}}\;{\mathrm{constraints}} & {}


& {{\mathbf{S}} \cdot {\boldsymbol{v}} = 0,} \\ {} & {} & {{\boldsymbol{v}}_L \le {\boldsymbol{v}} \le {\boldsymbol{v}}_U,} \\ {\mathrm{TFA}}\;{\mathrm{constraints}} & {}


& {\Delta _r{\mathrm{G}}_i^{\prime} = \mathop {\sum }\limits_{j = 1}^m n_{i,j}\Delta _f{\mathrm{G}}_j^{\prime o} + RT\ln \left( {\mathop {\prod }\limits_{j = 1}^m x_j^{n_{i,j}}}


\right),i = 1, \ldots ,n,} \\ {} & {} & {\Delta _r{\mathrm{G}}_i^\prime - M + M \cdot b_i^F \le 0} \\ {} & {} & { - \Delta _r{\mathrm{G}}_{i}^{\prime} - M + M \cdot b_i^R \le


0} \\ {} & {} & {v_i^{F,R} - M \cdot b_i^{F,R} \le 0} \\ {} & {} & {b_i^F + b_i^R \le 1} \\ {\mathrm{IMM}}\;{\mathrm{constraints}} & {} & {{\mathbf{b}}^F +


{\mathbf{b}}^R + C \cdot {\mathbf{z}} \le C,} \end{array}$$ (2) where _n__b_ is the total number of boundary reactions in the model, _z__k_ are new binary variables for all the boundary


reactions, S is the stoichiometric matrix, _V_ are the net fluxes for all the reactions and \(v_i^F,v_i^R\) are the corresponding net-forward and net-reverse fluxes, so that, \(v_{i} =


v_{i}^{F} - v_{i}^{R},\;\;{\mathrm{for}}\;{\mathrm{all}}\;\; i = 1, \ldots ,n\). \({\boldsymbol{v}}_L\) and \({\boldsymbol{v}}_U\) are the lower and upper bound, respectively, for all the


reactions in the network. \(\Delta _r{\mathbf{G}}^\prime\) is the Gibb’s free energy of the reactions defined in TFA. \({\mathbf{b}}_{}^F\) and \({\mathbf{b}}_{}^R\) are the binary variables


for the forward or reverse fluxes of all the reactions (coupled to TFA). _M_ is a big constant (bigger than all upper bounds) and _C_ is an arbitrary large number. In this case, if \(z_k =


0\), then reaction _k_ is active. REDGEM, REDGEMX, AND LUMPGEM The redGEM, redGEMX, and lumpGEM algorithms seek to generate systematic reductions of the GEMs starting from chosen subsystems


(or lists of reactions and metabolites, such as the synthesis pathway of a target metabolite), based on the studied physiology and the specific parts of the metabolism that are of interest.


redGEM is a published algorithm35 that extracts the reactions that pairwise-connect the initial subsystems from the GEM, generating a connected network named the core network. The inputs for


redGEM are (i) the GEM, (ii) the starting subsystems or an initial set of reactions, (iii) the extracellular medium metabolites, (iv) a list with the GEM cofactor pairs, and (v) the desired


degree of connectivity. The algorithm then performs an expansion (by graph search) of the starting subsystems by finding the reactions that pairwise-connect the subsystems up to the


selected degree (see ref. 35 for further details). For example, for a degree equal to 2, it will connect the metabolites from the starting subsystem that are one and two reactions away in


the GEM. redGEMX is a formulated algorithm that finds the pathways in the GEM that connect the extracellular medium to the core network generated with redGEM (Fig. 6). These pathways are


added to the core network. The redGEMX method involves five steps: * (1) Classify the extracellular metabolites of the GEM into 3 classes: * (a) Those that are part of the medium that we


want to connect, * (b) Those that are already present in the inter-connected subsystems network, * (c) Those that do not belong to (a) nor (b). * (2) Classify the reactions from the GEM into


2 classes: * (a) Those that belong to the inter-connected subsystems network (core-reactions), * (b) those that do not belong to the inter-connected subsystems network (non-core reactions).


* (3) Block the flux through the reactions in the GEM that involve only extracellular metabolites. * (4) Block the flux through the boundary reactions of other metabolites in the GEM (1c).


Steps (3) and (4) guarantee that the subnetwork reaches the core network. * (5) Force the uptake of a medium metabolite (1a, one-by-one) and minimize the number of non-core reactions (2b)


required to connect this extracellular metabolite to any core metabolite participating in a core reaction (2a). Note that the subnetwork will contain any reaction required to balance the


by-products secreted by the subnetwork and/or the core network. The redGEMX is a MILP problem that is formulated as follows: * (i) Consider the TFA problem of the model that we want to


reduce. * (ii) Create binary variables _z__i_ for each non-core reaction (2b). Non-core reactions are denoted as _R__nc_. * (iii) Generate a constraint that controls the flux for each


non-core reaction: $${\mathbf{b}}^F + {\mathbf{b}}^R + {\mathbf{z}} \le 1,$$ (3) where B_F_ and B_R_ are the binary variables for the forward and reverse fluxes of all the reactions (coupled


to the TFA constraints); when _z__i_ = 1, the corresponding reaction is inactive. * (iv) Build the following MILP problem for each extracellular medium metabolite (1a) $$\max \mathop {\sum


}\limits_{i = 1}^{R^{nc}} z_i$$ (4) subject to: $${\mathbf{b}}^F + {\mathbf{b}}^R + {\mathbf{z}} \le 1,$$ (5) $$v_{eM,j} \ge c,$$ (6) where _v__eM,j_ is the flux of the _j_th extracellular


medium metabolite (1a), and _c_ is a small number. lumpGEM is a published algorithm36 that generates elementally balanced lumped reactions for the synthesis of the biomass building blocks


(BBBs). Using a MILP formulation, lumpGEM identifies the smallest subnetwork (minimum number of reactions from the GEM) required to produce each BBB from metabolites that belong to the core


network using reactions from the GEM that are not part of the core. With this formulation, we can identify all the alternative subnetworks (of minimal size or larger) for the synthesis of


each BBB (one by one). lumpGEM generates, for each BBB, an overall lumped reaction by adding all the reactions that constitute each subnetwork (see ref. 36 for further details). Note here,


different subnetworks can give rise to the same overall lumped reaction. This implies that although we produce all the alternative subnetworks with their associated lumped reactions, only


the unique lumped reactions will be added to the final reduction. SOFTWARE The simulations of this article have been done with Matlab 2017b and CPLEX 12.7.1. Escher73 has been used to draw


the subnetworks in the figures. REPORTING SUMMARY Further information on research design is available in the Nature Research Reporting Summary linked to this article. DATA AVAILABILITY The


models generated in this work and the data integrated in the models to define the physiology of leukemia cells are available under the APACHE 2.0 license at


https://github.com/EPFL-LCSB/redhuman. CODE AVAILABILITY The scripts to generate the results for this paper are available under the APACHE 2.0 license at


https://github.com/EPFL-LCSB/redhuman. The code for TFA is available at https://github.com/EPFL-LCSB/mattfa. The code to reduce the human GEMs (redGEM), to connect the extracellular medium


to the core (redGEMX), and to generate the biosynthetic lumped reactions (lumpGEM) are available at https://github.com/EPFL-LCSB/redgem. CHANGE HISTORY * _ 23 JULY 2020 An amendment to this


paper has been published and can be accessed via a link at the top of the paper. _ REFERENCES * Hanahan, D. & Weinberg, R. A. Hallmarks of cancer: the next generation. _Cell_ 144,


646–674 (2011). CAS  PubMed  Google Scholar  * Mardinoglul, A. & Nielsen, J. New paradigms for metabolic modeling of human cells. _Curr. Opin. Biotechnol._ 34, 91–97 (2015). Google


Scholar  * Orth, J. D. et al. A comprehensive genome-scale reconstruction of _Escherichia coli_ metabolism. _Mol. Syst. Biol._ 7, 535 (2011). PubMed  PubMed Central  Google Scholar  *


Kerkhoven, E. J., Pomraning, K. R., Baker, S. E. & Nielsen, J. Regulation of amino-acid metabolism controls flux to lipid accumulation in _Yarrowia lipolytica_. _npj Syst. Biol. Appl._


2, 16005 (2016). PubMed  PubMed Central  CAS  Google Scholar  * Heavner, B. D., Smallbone, K., Price, N. D. & Walker, L. P. Version 6 of the consensus yeast metabolic network refines


biochemical coverage and improves model performance. _Database_ https://doi.org/10.1093/database/bat059 (2013). * Mardinoglu, A., Gatto, F. & Nielsen, J. Genome-scale modeling of human


metabolism a systems biology approach. _Biotechnol. J._ 8, 985 (2013). PubMed  CAS  Google Scholar  * O’Brien, E. J., Monk, J. M. & Palsson, B. O. Using genome-scale models to predict


biological capabilities. _Cell_ 161, 971–987 (2015). PubMed  PubMed Central  Google Scholar  * Orth, J. D., Thiele, I. & Palsson, B. O. What is flux balance analysis? _Nat. Biotechnol._


28, 245–248 (2010). PubMed  PubMed Central  CAS  Google Scholar  * Henry, C. S., Broadbelt, L. J. & Hatzimanikatis, V. Thermodynamics-based metabolic flux analysis. _Biophys. J._ 92,


1792–1805 (2007). ADS  PubMed  CAS  Google Scholar  * Soh, K. C. & Hatzimanikatis, V. Network thermodynamics in the post-genomic era. _Curr. Opin. Microbiol._ 13, 350–357 (2010). PubMed


  CAS  Google Scholar  * Ataman, M. & Hatzimanikatis, V. Heading in the right direction: thermodynamics-based network analysis and pathway engineering. _Curr. Opin. Biotechnol._ 36,


176–182 (2015). PubMed  CAS  Google Scholar  * Soh, K. C. & Hatzimanikatis, V. Constraining the flux space using thermodynamics and integration of metabolomics data. In _Methods in


Molecular Biology_ 49–63 (2014). * Salvy, P. et al. pyTFA and matTFA: a Python package and a Matlab toolbox for thermodynamics-based flux analysis. _Bioinformatics_ 35, 167–169 (2018).


PubMed Central  Google Scholar  * Zhang, C. et al. ESS: a tool for genome-scale quantification of essentiality score for reaction/genes in constraint-based modeling. _Front. Physiol._ 9,


1355 (2018). ADS  PubMed  PubMed Central  Google Scholar  * Lewis, N. E., Nagarajan, H. & Palsson, B. O. Constraining the metabolic genotype–phenotype relationship using a phylogeny of


in silico methods. _Nat. Rev. Microbiol._ 10, 291–305 (2012). PubMed  PubMed Central  CAS  Google Scholar  * Nielsen, J. Systems biology of metabolism. _Annu. Rev. Biochem._ 86, 245–275


(2017). PubMed  CAS  Google Scholar  * Bordbar, A. & Palsson, B. O. Using the reconstructed genome-scale human metabolic network to study physiology and pathology. _J. Intern. Med._ 271,


131–141 (2012). PubMed  PubMed Central  CAS  Google Scholar  * Zhang, C. & Hua, Q. Applicatons of genome-scale metabolic models in biotechnology and systems medicine. _Front. Physiol._


6, 413 (2016). PubMed  PubMed Central  Google Scholar  * Chakrabarti, A., Miskovic, L., Soh, K. C. & Hatzimanikatis, V. Towards kinetic modeling of genome-scale metabolic networks


without sacrificing stoichiometric, thermodynamic and physiological constraints. _Biotechnol. J._ 8, 1043–1057 (2013). PubMed  CAS  Google Scholar  * Miskovic, L., Tokic, M., Fengos, G.


& Hatzimanikatis, V. Rites of passage: requirements and standards for building kinetic models of metabolic phenotypes. _Curr. Opin. Biotechnol._ 36, 146–153 (2015). PubMed  CAS  Google


Scholar  * Srinivasan, S., Cluett, W. R. & Mahadevan, R. Constructing kinetic models of metabolism at genome-scales: a review. _Biotechnol. J._ 10, 1345–1359 (2015). PubMed  CAS  Google


Scholar  * Stanford, N. J. et al. Systematic construction of kinetic models from genome-scale metabolic networks. _PLoS ONE_ 8, e79195 (2013). ADS  PubMed  PubMed Central  Google Scholar  *


Duarte, N. C. et al. Global reconstruction of the human metabolic network based on genomic and bibliomic data. _Proc. Natl Acad. Sci. USA_ 104, 1777–1782 (2007). ADS  PubMed  CAS  PubMed


Central  Google Scholar  * Thiele, I. & Palsson, B. O. A protocol for generating a high-quality genome-scale metabolic reconstruction. _Nat. Protoc._ 5, 93–121 (2010). PubMed  PubMed


Central  CAS  Google Scholar  * Mardinoglu, A. et al. Genome-scale metabolic modelling of hepatocytes reveals serine deficiency in patients with non-alcoholic fatty liver disease. _Nat.


Commun._ 5, 3083 (2014). ADS  PubMed  Google Scholar  * Thiele, I. et al. A community-driven global reconstruction of human metabolism. _Nat. Biotechnol._ 31, 419 (2013). PubMed  CAS  Google


Scholar  * Swainston, N. et al. Recon 2.2: from reconstruction to model of human metabolism. _Metabolomics_ 12, 109 (2016). PubMed  PubMed Central  Google Scholar  * Brunk, E. et al.


Recon3D enables a three-dimensional view of gene variation in human metabolism. _Nat. Biotechnol._ 36, 272 (2018). PubMed  PubMed Central  CAS  Google Scholar  * Ebrahim, A. et al.


Multi-omic data integration enables discovery of hidden biological regularities. _Nat. Commun._ 7, 13091 (2016). ADS  PubMed  PubMed Central  CAS  Google Scholar  * Aurich, M. K. et al.


Prediction of intracellular metabolic states from extracellular metabolomic data. _Metabolomics_ 11, 603–619 (2015). PubMed  CAS  Google Scholar  * Schmidt, B. J. et al. GIM(3)E:


condition-specific models of cellular metabolism developed from metabolomics and expression data. _Bioinformatics_ 29, 2900–2908 (2013). PubMed  PubMed Central  CAS  Google Scholar  *


Becker, S. A. & Palsson, B. O. Context-specific metabolic networks are consistent with experiments. _PLoS Comput. Biol._ 4, e1000082 (2008). ADS  MathSciNet  PubMed  PubMed Central 


Google Scholar  * Wang, Y., Eddy, J. A. & Price, N. D. Reconstruction of genome-scale metabolic models for 126 human tissues using mCADRE. _BMC Syst. Biol._ 6, 153 (2012). PubMed  PubMed


Central  Google Scholar  * Agren, R. et al. Identification of anticancer drugs for hepatocellular carcinoma through personalized genome-scale metabolic modeling. _Mol. Syst. Biol._ 10, 721


(2014). PubMed  PubMed Central  Google Scholar  * Ataman, M., Gardiol, D. F. H., Fengos, G. & Hatzimanikatis, V. redGEM: systematic reduction and analysis of genome-scale metabolic


reconstructions for development of consistent core metabolic models. _PLoS Comput. Biol._ 13, e1005444 (2017). PubMed  PubMed Central  Google Scholar  * Ataman, M. & Hatzimanikatis, V.


lumpGEM: systematic generation of subnetworks and elementally balanced lumped reactions for the biosynthesis of target metabolites. _PLoS Comput. Biol._ 13, e1005513 (2017). ADS  PubMed 


PubMed Central  Google Scholar  * Tymoshenko, S. et al. Metabolic needs and capabilities of _Toxoplasma gondii_ through combined computational and experimental analysis. _PLoS Comput. Biol._


11, e1004261 (2015). PubMed  PubMed Central  Google Scholar  * Chiappino-Pepe, A., Tymoshenko, S., Ataman, M., Soldati-Favre, D. & Hatzimanikatis, V. Bioenergetics-based modeling of


_Plasmodium falciparum_ metabolism reveals its essential genes, nutritional requirements, and thermodynamic bottlenecks. _PLoS Comput. Biol._ 13, e1005397 (2017). ADS  PubMed  PubMed Central


  Google Scholar  * Folger, O. et al. Predicting selective drug targets in cancer through metabolic networks. _Mol. Syst. Biol._ 7, 501 (2011). PubMed  PubMed Central  CAS  Google Scholar  *


Zielinski, D. C. et al. Systems biology analysis of drivers underlying hallmarks of cancer cell metabolism. _Sci. Rep._ 7, 41241 (2017). ADS  PubMed  PubMed Central  CAS  Google Scholar  *


Shlomi, T., Benyamini, T., Gottlieb, E., Sharan, R. & Ruppin, E. Genome-scale metabolic modeling elucidates the role of proliferative adaptation in causing the Warburg effect. _PLoS


Comput. Biol._ 7, e1002018 (2011). ADS  PubMed  PubMed Central  CAS  Google Scholar  * Warburg, O. On the metabolism of cancer cells. _Naturwissenschaften_ 12, 1131–1137 (1924). ADS  CAS 


Google Scholar  * Fenninger, L. D. & Mider, G. B. Energy and nitrogen metabolism in cancer. _Adv. Cancer Res._ 2, 229–251 (1954). PubMed  CAS  Google Scholar  * Cairns, R. A., Harris, I.


S. & Mak, T. W. Regulation of cancer cell metabolism. _Nat. Rev. Cancer_ 11, 85–95 (2011). PubMed  CAS  Google Scholar  * Dang, C. V. Links between metabolism and cancer. _Genes Dev._


26, 877–890 (2012). PubMed  PubMed Central  CAS  Google Scholar  * Di Filippo, M. et al. Zooming-in on cancer metabolic rewiring with tissue specific constraint-based models. _Comput. Biol.


Chem._ 62, 60–69 (2016). PubMed  Google Scholar  * Hosios, A. M. et al. Amino acids rather than glucose account for the majority of cell mass in proliferating mammalian cells. _Dev. Cell_


36, 540–549 (2016). PubMed  PubMed Central  CAS  Google Scholar  * Hay, N. Reprogramming glucose metabolism in cancer: can it be exploited for cancer therapy? _Nat. Rev. Cancer_ 16, 635–649


(2016). PubMed  PubMed Central  CAS  Google Scholar  * Wise, D. R. & Thompson, C. B. Glutamine addiction: a new therapeutic target in cancer. _Trends Biochem. Sci._ 35, 427–433 (2010).


PubMed  PubMed Central  CAS  Google Scholar  * Kanarek, N. et al. Histidine catabolism is a major determinant of methotrexate sensitivity. _Nature_ 559, 632–636 (2018). ADS  PubMed  PubMed


Central  CAS  Google Scholar  * Henry, C. S., Broadbelt, L. J. & Hatzimanikatis, V. Discovery and analysis of novel metabolic pathways for the biosynthesis of industrial chemicals:


3-hydroxypropanoate. _Biotechnol. Bioeng._ 106, 462–473 (2010). PubMed  CAS  Google Scholar  * Du, B., Zielinski, D. C., Monk, J. M. & Palsson, B. O. Thermodynamic favorability and


pathway yield as evolutionary tradeoffs in biosynthetic pathway choice. _Proc. Natl Acad. Sci. USA_ 115, 11339–11344 (2018). PubMed  CAS  PubMed Central  Google Scholar  * Feist, A. M. &


Palsson, B. O. The biomass objective function. _Curr. Opin. Microbiol._ 13, 344–349 (2010). PubMed  PubMed Central  CAS  Google Scholar  * Kanehisa, M., Furumichi, M., Tanabe, M., Sato, Y.


& Morishima, K. KEGG: new perspectives on genomes, pathways, diseases and drugs. _Nucleic Acids Res._ 45, D353–D361 (2017). PubMed  CAS  Google Scholar  * Jain, M. et al. Metabolite


profiling identifies a key role for glycine in rapid cancer cell proliferation. _Science_ 336, 1040–1044 (2012). ADS  PubMed  PubMed Central  CAS  Google Scholar  * Kilburn, D. G., Lilly, M.


D. & Webb, F. C. The energetics of mammalian cell growth. _J. Cell Sci._ 4, 645–654 (1969). PubMed  CAS  Google Scholar  * DeBerardinis, R. J. & Chandel, N. S. Fundamentals of


cancer metabolism. _Sci. Adv._ 2, e1600200 (2016). ADS  PubMed  PubMed Central  Google Scholar  * Hatzimanikatis, V. et al. Exploring the diversity of complex metabolic networks.


_Bioinformatics_ 21, 1603–1609 (2005). PubMed  CAS  Google Scholar  * Jankowski, M. D., Henry, C. S., Broadbelt, L. J. & Hatzimanikatis, V. Group contribution method for thermodynamic


analysis of complex metabolic networks. _Biophys. J._ 95, 1487–1499 (2008). PubMed  PubMed Central  CAS  Google Scholar  * Wilhelm, M. et al. Mass-spectrometry-based draft of the human


proteome. _Nature_ 509, 582–587 (2014). ADS  PubMed  CAS  Google Scholar  * Uhlen, M. et al. Proteomics. Tissue-based map of the human proteome. _Science_ 347, 1260419 (2015). PubMed  Google


Scholar  * Jerby, L., Shlomi, T. & Ruppin, E. Computational reconstruction of tissue-specific metabolic models: application to human liver metabolism. _Mol. Syst. Biol._ 6, 401 (2010).


PubMed  PubMed Central  Google Scholar  * Bordbar, A. et al. Elucidating dynamic metabolic physiology through network integration of quantitative time-course metabolomics. _Sci. Rep._ 7,


46249 (2017). ADS  PubMed  PubMed Central  Google Scholar  * Sanchez, B. J. et al. Improving the phenotype predictions of a yeast genome-scale metabolic model by incorporating enzymatic


constraints. _Mol. Syst. Biol._ 13, 935 (2017). PubMed  PubMed Central  Google Scholar  * Salvy, P. & Hatzimanikatis, V. The ETFL formulation allows multi-omics integration in


thermodynamics-compliant metabolism and expression models. _Nat. Commun._ 11, 30 (2020). ADS  PubMed  PubMed Central  CAS  Google Scholar  * Pandey, V., Hernandez Gardiol, D.,


Chiappino-Pepe, A. & Hatzimanikatis, V. TEX-FBA: a constraint-based method for integrating gene expression, thermodynamics, and metabolomics data into genome-scale metabolic models.


_bioRxiv 101101/536235_ (2019). * Yizhak, K., Benyamini, T., Liebermeister, W., Ruppin, E. & Shlomi, T. Integrating quantitative proteomics and metabolomics with a genome-scale metabolic


network model. _Bioinformatics_ 26, i255–i260 (2010). PubMed  PubMed Central  CAS  Google Scholar  * Richelle, A., Chiang, A. W. T., Kuo, C. C. & Lewis, N. E. Increasing consensus of


context-specific metabolic models by integrating data-inferred cell functions. _PLoS Comput. Biol._ 15, e1006867 (2019). PubMed  PubMed Central  Google Scholar  * Moretti, S. et al.


MetaNetX/MNXref—reconciliation of metabolites and biochemical reactions to bring together genome-scale metabolic networks. _Nucleic Acids Res._ 44, D523–D526 (2016). PubMed  CAS  Google


Scholar  * Overbeek, R. et al. The subsystems approach to genome annotation and its use in the project to annotate 1000 genomes. _Nucleic Acids Res._ 33, 5691–5702 (2005). PubMed  PubMed


Central  CAS  Google Scholar  * Hastings, J. et al. ChEBI in 2016: Improved services and an expanding collection of metabolites. _Nucleic Acids Res._ 44, D1214–D1219 (2016). PubMed  CAS 


Google Scholar  * Wishart, D. S. et al. HMDB 4.0: the human metabolome database for 2018. _Nucleic Acids Res._ 46, D608–D617 (2018). PubMed  CAS  Google Scholar  * King, Z. A. et al. Escher:


a web application for building, sharing, and embedding data-rich visualizations of biological pathways. _PLoS Comput. Biol._ 11, e1004321 (2015). PubMed  PubMed Central  Google Scholar  *


Harayama, T. & Riezman, H. Understanding the diversity of membrane lipid composition. _Nat. Rev. Mol. Cell Biol._ 19, 281–296 (2018). PubMed  CAS  Google Scholar  Download references


ACKNOWLEDGEMENTS We would like to thank Dr. G. Fengos, Dr. J. P. Vieira and Dr. D. R. Weilandt for constructive discussions and feedback; and Dr. K. Butler for valuable comments proofreading


this paper. This project has received financial support from the European Unionʼs Horizon 2020 research and innovation programme under the Marie Skłodowska Curie Grant Agreement No. 675585


SyMBioSys, and under Grant Agreement No. 686070, and from the RTD project MicroScapeX (grant 2013/158) funded by SystemsX.ch, the Swiss Initiative for Systems Biology evaluated by the Swiss


National Science Foundation. AUTHOR INFORMATION AUTHORS AND AFFILIATIONS * Laboratory of Computational Systems Biotechnology, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne,


Switzerland Maria Masid & Vassily Hatzimanikatis * Computational and Systems Biology, Biozentrum, University of Basel, Basel, Switzerland Meric Ataman Authors * Maria Masid View author


publications You can also search for this author inPubMed Google Scholar * Meric Ataman View author publications You can also search for this author inPubMed Google Scholar * Vassily


Hatzimanikatis View author publications You can also search for this author inPubMed Google Scholar CONTRIBUTIONS M.M., M.A., and V.H. conceptualized the paper, defined the methodology, and


performed the investigation. M.M. and M.A. designed the code and performed the simulations. M.M. and V.H. wrote the manuscript and all authors edited and reviewed the manuscript. V.H.


acquired the funding and the resources, and supervised the project. CORRESPONDING AUTHOR Correspondence to Vassily Hatzimanikatis. ETHICS DECLARATIONS COMPETING INTERESTS The authors declare


no competing interests. ADDITIONAL INFORMATION PEER REVIEW INFORMATION _Nature Communications_ thanks the anonymous reviewer(s) for their contribution to the peer review of this work.


PUBLISHER’S NOTE Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. SUPPLEMENTARY INFORMATION SUPPLEMENTARY INFORMATION


SUPPLEMENTARY DATA 1 SUPPLEMENTARY DATA 2 SUPPLEMENTARY DATA 3 REPORTING SUMMARY DESCRIPTION OF ADDITIONAL SUPPLEMENTARY FILES RIGHTS AND PERMISSIONS OPEN ACCESS This article is licensed


under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate


credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article


are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and


your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this


license, visit http://creativecommons.org/licenses/by/4.0/. Reprints and permissions ABOUT THIS ARTICLE CITE THIS ARTICLE Masid, M., Ataman, M. & Hatzimanikatis, V. Analysis of human


metabolism by reducing the complexity of the genome-scale models using redHUMAN. _Nat Commun_ 11, 2821 (2020). https://doi.org/10.1038/s41467-020-16549-2 Download citation * Received: 23


September 2019 * Accepted: 07 May 2020 * Published: 04 June 2020 * DOI: https://doi.org/10.1038/s41467-020-16549-2 SHARE THIS ARTICLE Anyone you share the following link with will be able to


read this content: Get shareable link Sorry, a shareable link is not currently available for this article. Copy to clipboard Provided by the Springer Nature SharedIt content-sharing


initiative